Adjustable Flow Air Amplifiers
15000 Series - Hurricane Adjustable Aluminum Air Amplifier
15100 Series - Hurricane Adjustable Aluminum Air Amplifier w/ Filter
15200 Series - Hurricane Adjustable Aluminum Air Amplifier w/ Filter & Regulator
10000 Series - Hurricane Adjustable Stainless Steel Air Amplifier
10100 Series - Hurricane Adjustable Stainless Steel Air Amplifier w/ Filter
10200 Series - Hurricane Adjustable Stainless Steel Air Amplifier w/ Filter & Regulator
Mounting Brackets
Air amplification gives you high performance with low noise
The AiRTXTM Air Amplifier releases a tiny amount of compressed air at near-sonic velocity through an adjustable,
internal, ring-shaped nozzle. The high-speed "tube" of air released through the front creates a strong vacuum behind
itself, pulling additional surrounding air through the rear of the amplifier, while pushing the ambient air in front.
Adjustable Air Amplifiers for quiet, safe, maintenance-free air moving and conveying
AiRTXTM Adjustable Air Amplifiers do big air handling jobs with just a small amount of compressed air - no moving parts, no electricity, no spark or explosion hazard.
Use them ducted or open, the same way you'd use a vacuum system, fan, or blower, to handle dusts, fumes or granular, stringy material.
In ducted applications, Air Amplifiers deliver amplification ratios of 12-25:1, capable of producing output flows of 100 to 2000 SCFM (2800-56,000 SLPM), using the factory-set nozzle opening (which you can change). Unducted amplification ratios range from 36-75:1.
Use Model 15008R and Model 15015R on the suction end for in-line conveying applications.
 | ||||||
| Amplifier Dimensions | Throat Dia. | |||||
|---|---|---|---|---|---|---|
| Models | A | B | C | D | E | |
| 15008 10008 | 1.25" 32 mm | 2.00" 50 mm | 2.625" 67 mm | 1.02" 26 mm | 1/4 NPT | 0.80" 20 mm |
| 15015 10015 | 2.00" 50 mm | 3.00" 76 mm | 3.25" 83 mm | 1.06" 27 mm | 3/8 NPT | 1.50" 38 mm |
| 15025 10025 |
2.50" 64 mm |
3.70" 94 mm |
3.70" 94 mm |
1.20" 30 mm |
3/8 NPT | 2.25" 57 mm |
| 15030 | 4.00" 100 mm | 5.00" 125 mm | 5.00" 125 mm | 1.50" 38 mm | 1/2 NPT | 3.00" 76 mm |
- Low cost
- Greatly reduced noise
- Easy to control flow/force
- Instant on/off
- Adjustable output without tools or shims
- No blades, guards or clumsy duct
- No maintenance, no moving parts
- No electricity or explosion hazard
- Available in aluminum or stainless steel
Industry Solutions
- Air conveying any material that can be moved in a rush of air: chips, sawdust, smoke, paper and cloth trim, grain, dust, capsules, powder
- Ventilation and exhaust of smoke/fumes, replacing fans
- Blow-off chips, trim scrap, water, dust
- Part cleaning before finishing, replacing open air lines
- Purging tanks
- Cooling molded parts and castings
- Cleaning/cooling of conveyed parts
- Pneumatic conveying
| Model | Description | Throat Diameter | AMP Ratio | Adj. Factory Setting | Price | |
|---|---|---|---|---|---|---|
| Hurricane Adjustable Air Amplifiers - Aluminum | ||||||
15008  |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $90 | 
|
| 15015 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $115 |
|
| 15025 |
2.5 in. (64mm) | 2.25" | 25:1 | 45 cfm | $265 |
|
| 15030 |
4 in. (102mm) | 3.01" | 30:1 | 65 cfm | $330 |
|
| Hurricane Adjustable Air Amplifiers - Aluminum w/ Filter | ||||||
| 15108 |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $155 |
|
| 15115 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $170 |
|
| 15125 |
2.5 in. (64mm) | 2.25" | 25:1 | 45 cfm | $320 |
|
| 15130 |
4 in. (102mm) | 3.01" | 30:1 | 65 cfm | $405 |
|
| Hurricane Adjustable Air Amplifiers - Aluminum w/ Filter and Regulator | ||||||
| 15208 |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $190 |
|
| 15215 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $215 |
|
| 15225 |
2.5 in.(64mm) | 2.25" | 25:1 | 45 cfm | $365 |
|
| 15230 |
4 in. (102mm) | 3.01" | 30:1 | 65 cfm | $495 |
|
| Hurricane Adjustable Air Amplifiers - Stainless Steel | ||||||
| 10008 |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $235 |
|
| 10015 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $280 |
|
| 10025 |
2.5 in. (57mm) | 2.25" | 25:1 | 45 cfm | $710 |
|
| Hurricane Adjustable Air Amplifiers - Stainless Steel w/ Filter | ||||||
| 10108 |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $285 |
|
| 10115 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $335 |
|
| Hurricane Adjustable Air Amplifiers - Stainless Steel w/ Filter and Regulator | ||||||
| 10208 |
1 1/4 in. (32mm) | 0.84" | 12:1 | 15 cfm | $335 |
|
| 10215 |
2 in. (51mm) | 1.64" | 20:1 | 25 cfm | $385 |
|
| Hurricane Reducer For Inline Applications On Air Amplifier - Aluminum | ||||||
| 15008R | Model 15008 | $52 |
|
|||
| 15015R | Model 15015 | $56 |
|
|||
| Mounting Brackets | ||||||
| 10000-30 | For Model 15008 | $14 |
|
|||
| 10000-31 | For Model 15015 | $22 |
|
|||