AiRTX International

Cut Your Compressed Air Use an Average of 70% - Increase Output 25 Times

The AiRTX^TM Air Saver Nozzles harness the power of compressed air to do BIG blow-off, cooling and parts ejection jobs, without spewing raw compressed air and noise all over your plant. It's ideal for anything from a hand-held blow-off gun to multi-unit nozzle manifolds for conveyorized product or transfer lines. Even small air usage applications can show major cost reductions.

The Air Saver Nozzle gives you cost and performance advantages with air amplification. It amplifies your compressed air flow 25 times, delivering high thrust with just a fraction of the compressed air wasted by open air lines.

One 1/4" open air line, operating at 80 PSI on an eight-hour schedule, will cost $1500/year. The adjustable Air Saver Nozzle would use 70 percent less air - only $450/year - and provide 375 SCFM of air, compared to 36 SCFM from the open air line.

A system-wide changeover to Air Saver Nozzles can be like adding compressor capacity. Air Saver Nozzles will:

• cut your energy bill
• increase air flow with reduced noise level
• reduce demand on your compressor
• give you a return on investment in days.

Compare AiRTX International Nozzles with Your Method

How does the Air Saver Nozzle work?

The Air Saver releases a tiny amount of compressed air at near-sonic velocity through a fine, ring-shaped nozzle. As the high-speed "tube" of air emerges from the nozzle, it creates a strong vacuum along its sides, pulling a much larger volume of surrounding air into the stream. At 12" in front of the nozzle, the airstream is 3-1/2" diameter and capable of producing force levels of 3.4 to 20.1 ozs. (0.096 - 0.570 kg) depending on the setting.

Uses

• Ejecting parts from molding machines and stamping presses
• Blow off chips, trim scrap, swarf
• Part cleaning before painting
• Plant air conservation and noise reduction
• Cooling molded or cast parts
• Cleaning/cooling of metal strip and plastic/paper webs
• Cleaning/cooling of conveyorized or transfer line parts

Stainless steel or aluminum construction

Low-cost aluminum Air Savers are ideal for most industrial applications. Stainless steel units are ideal for:

• food processing applications
• hot corrosive environments
• maximum durability in harsh environments

Always consider our Aluminum Extension rods or our Flexible Sta-Put hoses for those hard to reach or hard to mount locations. The rods and hoses can be added to your order in the shopping cart with each item.