Gate Air Wipes
Models 16107
Gate Air Wipes
Gate Air Wipe blowing water off of a steel tube
2-Piece Hinged Air Wipe Provides a Circle of High Volume, High Velocity Air While Minimizing Compressed Air Usage
The AiRTX Gate Air Wipe amplifies air at a 25:1 ratio providing high air flow for cooling and drying products on all sides. The circular air flow of the air wipe gives an even, forceful, flow circling the product, removing water or dirt.
AiRTX Air Wipe Advantages
- Low cost
- No maintenance, no moving parts
- Easy to control flow/force
- Greatly reduces noise
- No electricity or explosion hazard
- Instant on/off
| Model | Description | CFM Usage | Price | |||||
|---|---|---|---|---|---|---|---|---|
| 20psi | 40psi | 60psi | 80psi | 100psi | ||||
| Aluminum Gate Air Wipe | ||||||||
| 16103 | 3" Diameter | 18 | 24 | 28 | 32 | 38 | $395 | 
|
| 16105 | 5" Diameter | 28 | 38 | 48 | 54 | 62 | $725 |
|
| 16107 | 7" Diameter | 38 | 56 | 70 | 80 | 90 | $1150 |
|
| Stainless Steel Gate Air Wipes | ||||||||
| 10103 | 3" Diameter | 18 | 24 | 28 | 32 | 38 | $995 |
|
| 10105 | 5" Diameter | 28 | 38 | 48 | 54 | 62 | $1295 |
|
| 10107 | 7" Diameter | 38 | 56 | 70 | 80 | 90 | $1950 |
|
Uses
- Blow-off chips, trim scrap, water, dust
- Part cleaning before finishing, replacing open air lines
- Cooling molded or castings
- Continous length products like hoses, pipes, etc.
- Easy placement of products with the Gate, like open and shut operations
Dimension Diagram
| Model | A | B | C | Inlet |
|---|---|---|---|---|
| 10103 | 3" 76mm | 1.5" 38mm | 6" 152mm | 1/4"NPT |
| 16103 | ||||
| 10105 | 5" 127mm | 1.5" 38mm | 8" 203mm | 1/4"NPT |
| 16105 | ||||
| 10107 | 7" 178mm | 1.5" 38mm | 10" 254mm | 1/4"NPT |
| 16107 |